PREVIOUS AND CURRENT GRADUATE STUDENTS SUPERVISED

BY

DAVID W. HOEPPNER, P.E., PH.D.

 

DATE

TITLE

STUDENT

DEGREE/UNIV.

1975

The Effect of Microstructure on the Fatigue Properties of A .40/.50 Carbon Steel

J. A. Wear

M.S., U of Missouri-Columbia

1976

The Effect of a Frequent-Environment Synergism on the Fatigue-Crack Growth of SA533B-1: A Nuclear Pressure Vessel Steel

J. Panhuise

M.S., U of Missouri-Columbia

1976

Influence of Microstructural and Load Wave Form Control on Fatigue Crack Growth Behavior of Precipitation Hardening Stainless Steels

K. R. Kondas

Ph.D., U of Missouri-Columbia

1976

The Residual Fatigue Life of 1020 Steel and 7075-T6 Aluminum as a Function of Initial Flaw Size

V. P. Shah

M.S., U of Missouri-Columbia

1976

The Effect of Crystallographic Orientation on Fatigue and Fretting of Copper Single Crystals

G. C. Salivar

M.S., U of Missouri-Columbia

1976

The Effect of Mean Stress and R Ratio on the Fatigue Behavior of Turbine Alloys

S. L. Cole

M.S., U of Missouri-Columbia

1977

The Effect of Frequency, Environment, and R Ratio on the Fatigue-Crack Growth of Nuclear Pressure Vessel Steel

A. Braun

M.S., U of Missouri-Columbia

1977

Effect of Surface Roughness on Fretting Fatigue Behavior of 7475-T61 Aluminum

R. Jordan

M.S., U of Missouri-Columbia

1977

Microstructural and Environmental Effects on Fretting Fatigue

R. K. Reeves

Ph.D., U of Missouri-Columbia

1977

Effect of Environment on Nuclear Materials

A. Tsai

Ph.D. University of Missouri-Columbia

1977

The Effect of Hardness and Different Materials on the Fretting Fatigue Behavior of Ti-6A1-4V

W. K. Watts, Jr.

M.S., U of Missouri-Columbia

1978

A Statistically Based Investigation of Microstructural Effects on the Fatigue Properties of Titanium and Titanium Alloys

D. A. Wilson

Ph.D., U of Missouri-Columbia

1978

The Statistical Analysis and Presentation of Fatigue-Crack Growth Rate Data

L. M. Mueller

M.S., U of Missouri-Columbia

1978

Corrosion Assisted Fatigue in 2024-T851 Aluminum Alloy

M. E. Mayfield

M.S., U of Missouri-Columbia

1978

Fatigue and Fretting Fatigue of Polycrystalline Copper

E. R. Nickel

M.S., U of Missouri-Columbia

1978

Environmental Effects on the Mechanism of Fretting Fatigue in 7075-T6 Aluminum

C. J. Poon

Ph.D., U of Missouri-Columbia

1979

Characterization of Metal Damage Through Infrared Technology

S. L. Langenbeck

Ph.D., U of Missouri-Columbia

1979

Pitting and Fatigue Crack Initiation of 2124-T851 Aluminum in 3.5% NaCl Solution

J. M. Cox

M.S., U of Missouri-Columbia

1979

A Statistically Based Analysis of the Effects of Frequency and Environment on the Faigue Characteristics of SA 533B-1 Steel

G. Salivar, co-supervisor.

Ph.D., U. of Missouri-Columbia

1979

Fretting Fatigue Stress Simulation

J. S. Chung

M.S., U of Missouri-Columbia

1982

A Statistical Approach to Miner's Rule

D. A. Hull

M.E., U of Toronto

1982

A New Apparatus for Studying Fretting Wear

D. Kusner

M.A.Sc., U of Toronto

1982

The Design and Development of an Experimental Apparatus for Fracture Mechanics Based Fretting Fatigue Studies with Electrohydraulic Closed Loop Servo-Control of Axial Load, Normal Load and Slip Amplitude

D. S. Mann

M.A.Sc., U of Toronto

1983

An Investigation into the Effects of Welding-Induced Residual Stresses and Microstructural Alterations on the Fatigue Crack Growth Behavior of Commercial Purity Titanium

David C. Wu

M.A.Sc., U of Toronto

1983

The Thermodynamic Aspects of Fracture and a Mathematical Method to Analyze Plane Elasto-Plastic Systems

F. L. Gates

Ph.D., U of Toronto

1983

Real-Time SEM Observation of Fatigue-Induced Slip in Polycrystalline Copper and Alpha-Brass

Fraser M. Smith

B.A.Sc., U of Toronto

1983

Corrosion Fatigue of 7075-T76 Aluminum 1 1/2 Dogbone Specimens

A. R. MacDonald

M.A.Sc., U of Toronto

1983

Corrosion Fatigue Behaviour of Ti-6Al-4V in Simulated Body Environments

M. Yanishevsky

M.A.Sc., U of Toronto

1983

A Statistically Based Investigation into the Effect of Grain Flow Orientation on the Fretting Fatigue Characteristics of Forged AMS6415 Steel

C. K. W. Yeung

M.A.Sc., U of Toronto

1984 An Investigation into the Design, Fabrication, Maintenance, and Repair Practices Associated with Rollover Protective Structures Fraser M. Smith M.A.Sc., U of Toronto

1984

The Development of an Automated Crack Growth Threshold Test System to Characterize IMI 685

G. C. Smith

M.A.Sc., U of Toronto

1984

The Effect of Extrinsic Load Parameters on the Elevated Temperature Fatigue of Life of Engineering Metals

F. P. Dean

M.E., U of Toronto

1984

Perspectives and Insights on the Cyclic Load Response of Metals

David W. Cameron

Ph.D., U of Toronto

1984

An Investigation into Test Frequency Effects on the Corrosion Fatigue Crack Growth Threshold of 7075-T6 Aluminum Alloy Using a Personal Computer Based Automated System

E. C. L. Mann

M.A.Sc., U of Toronto

1984

Determination of Stress Intensity Factors for Three Dimensional Crack Problems with Differential Stiffness Method

Z. Song

M.A.Sc., U of Toronto

1984

Using Lamination to Enhance Rotating Disc Damage Tolerance

W. J. Unger

M.A.Sc., U of Toronto

1985

An Investigation of the Fatigue Crack Growth Rate Characteristics of Titanium Alloy IMI829

P. M. Sooley

Ph.D., U of Toronto

1985

Computer Assisted Corrosion Fatigue Crack Growth Rate Testing Under Spectrum Loading

G. F. Ziebenhaus

M.A.Sc., U of Toronto

1986

Study of the Effects of Dwell Time on the Fatigue Crack Propagation Rate in Ti-6Al-4V Alloy

P. Beaudet

M.A.Sc., U of Toronto

1986

An Investigation into the Fatigue Crack Growth Characteristics of a Single Crystal Nickel-Base Superalloy

D. C. Wu

Ph.D., U of Toronto

1986

An Experimental Investigation of the Behaviour of Ti-6Al-2Sn-4Zr 2Mo Subjected to Biaxial Fatigue at an Elevated Temperature

W. G. Hellier

M.A.Sc., U of Toronto

1987

Improvements to an In-Situ Fatigue Apparatus Capable of Generating Qualitative and Quantitative Information Regarding the Fatigue Process in Metals

R.obert R. Stephens

M.S., U of Utah

1988

Fatigue Crack Growth in Ti-6Al-4V Subjected to the Turbistan Loading Sequence

David Salmon

M.S., U of Utah

1988

The Effects of Dwell Time on Material Behavior in Titanium Alloy IMI 829.

Z. Song

Ph.D., U of Utah

1988

Crack Propagation Thermodynamics

John S. Short

Ph.D., U of Utah

1988

Quantitative Representation of Microstructural Contributions to Fatigue Crack Growth

Fraser M. Smith

Ph.D., U of Utah

1988

The Design and Fabrication of a Spin Testing Facility

Daniel E. Gerbec

M.S., U of Utah

1989

An Investigation into the Fatigue Crack Growth Behaviour of an IMI 829 Titanium Rotating Disc Material

D. A. Hull

Ph.D., U of Toronto

1990

Fractographic Analysis and Microstructural Investigation of a Cast Nickel-Base Superalloy (MAR M247) Tested Under Fatigue and Creep Loading Conditions

J. Yan

M.S., U of Utah

1990

Fractographic Analysis of Two High Performance Alloys Designed for Use in Aircraft Gas Turbine Engines

A. D. Paulson

M.S., U of Utah

1990

The Effect of Microstructure on Fatigue Crack Growth Behavior in Nodular Cast Irons

M. Xia

M.S., U of Utah

1990

Failure Analysis of Front Wheel Hubs Used in Heavy Duty Trucks

Li Ma

M.S., U of Utah

1990

Fretting-Fatigue Study of 2090-T8E50 Alloy Sheets After Artificial Aging

X. Yao

M.S., U of Utah

1990

Surface Integrity and Fatigue Effects on In Vitro Degradation of Biomer

Mary Sinnott

M.S., U of Utah

1991

Permeability of Heart Diaphragms

J. Pauley

M.S., U of Utah

1991

Accelerated Wear Development on the 27 Millimeter St. Jude Artificial Heart Valve in the Mitral Position for Use in an Artificial Heart

J. Juretich

M.S., U of Utah

1991

In-Situ Short Fatigue Crack Characterization of a Nickel-Base Superalloy at Ambient and Elevated Temperature

Robert R. Stephens

Ph.D., U of Utah

1991

Investigations of the Fretting Fatigue Mechanisms on 7075-T6 Aluminum Alloy and Ti-6Al-4V Titanium Alloy

Saeed Adibnazari

Ph.D., U of Utah

1991

Uniaxial and Biaxial Stress Concentrations Due to Small, Flat Bottomed, Conical Indentations on the Surface of a Solid Cylindrical Bar

Mark L. Thomsen

M.S., U of Utah

1992

Reliability of Bearings for Artificial Hearts

R. Fratto

M.S., U of Utah

1992

Fatigue Crack Propagation in Silicon Nitride

D. C. Salmon

Ph.D., U of Utah

1992

Effect of Anisotropic Behaviour Upon Fatigue Crack Propagation in Rotating Disk

D. E. Gerbec

Ph.D., U of Utah

1992

No Thesis

M. Moesser

M.S., U of Utah

1992

No Thesis

A. Sabbagh

M.S., U of Utah

1992

Effects of Minor Loading Sequences on Aluminum Alloys

A. Paulson

Ph.D., U of Utah

1993

Evaluation of Graphite/Epoxy Laminate ARCS Subjected to Bending

K. Franklin

 

M.S., U of Utah

1993

Development of a Computer Controlled Compliance Based Fatigue Crack Growth Rate Data Acquisition System

D. D. Swartz

 

M.S., U of Utah

1993

Design Methodology

D. Macferran

Ph.D., U of Utah

1993

Aluminum Alloy Fretting in Air and a Vacuum

Charles Elliott III

Ph.D., U of Utah

1994

Pitting Effects on the Corrosion Fatigue Life of 7075-T6

Li Ma

Ph.D., U of Utah

1994

Finite Element Analysis of a Riveted Joint

Steven E Kinyon

M.S., U of Utah

1994

Strain Accumulation Behavior of Titanium Alloys

Mark Thomsen

Ph.D., U of Utah

1994

The Role of Fretting on the Fatigue Behavior of Ti-6Al-4V Orthopaedic Implant Material

Chandrasekaran Venkatesan

M.S., U of Utah

1994

The Effects of Exfoliation Corrosion on the Fatigue Response of 7075-T651 Aluminum Alloy

Thomas Mills

M.S., U of Utah

1995

Effect of Anisotropy on Corrosion Fatigue

Michael Blinn

Ph.D., U of Utah

1995

A Comparative Study of Corrosion Pit Morphology in 7075-T6 Aluminum Alloy

Lorie Grimes

M.S., U of Utah

1995

Effect of Realistic Environments on Aircraft Structures

Julie Kramer

M.S., U of Utah

1995

Temperature Effects on Corrosion Fatigue Crack Growth

Dan Magda

Ph.D., U of Utah

1996

Multiaxial Fatigue Behavior of Gas Turbine Materials

J. Yan

Ph.D., U of Utah

1996

Effect of Fretting Fatigue on Behavior of Riveted Aircraft Joints

Mark Moesser

Ph.D., U of Utah

1996

The Effect of Prior Corrosion Damage on the Short Crack Growth Rates of Two Aluminum Alloys

Amy Hoeppner

M.S., U of Utah

1996

The Effect of Frequency on the Fretting Fatigue Behavior of 7075-T651 Aluminum Alloy in Lab Air and Vacuum Environments

Douglas Culliton

Ph.D., U of Utah

1996

No Thesis

Akbar Shah

M.S., U. of Utah

1997

Effect of Exfoliation Corrosion on Fatigue Strength

Thomas Mills

Ph.D., U of Utah

1997

Effect of Realistic Chemical Environments on Fatigue Crack Growth

David Swartz

Ph.D., U of Utah

1997

Fretting Fatigue of AirMet100

James Ledesma

M.S., U of Utah

1997

Effects of Fretting Corrosion on the Fatigue Behavior of Modular Orthopaedic Implants

Chandrasekaran Venkatesan

Ph.D. U. of Utah

1998

The Effects of Load Spectrum on the Fretting Fatigue Behavior of Ti-6-4 Alloy

Steven E Kinyon

Ph.D., U of Utah

1998

Fretting Fatigue

Paul Clark

M.S., U. of Utah

2000

Reliability of X-ray tubes

David Critchley

M.S., U. of Utah

2000

Summary of Fatigue and Quality Case Studies

Todd Van Orman

M.S., U. of Utah

2000

Effect of Corrosion and Prior Cold Work on Fatigue of Rivet Holes in Aircraft Joints

Young In Yoon

Ph.D., U. of Utah

2000

Effect of Prior Corrosion on Cold Worked Holes Fatigue Behavior

Young In Yoon

Ph.D., U. of Utah

2001

Pitting Corrosion Fatigue

Paul Clark

Ph.D., U. Of Utah

2001

Fretting Fatigue

Akbar Shah

Ph.D., U of Utah

2002

Corrosion Fatigue-Pitting

Michael Risik

M.S., U. Of Utah

2003

A Single Cylinder Approach to In-Situ Study of Fatigue Cracks

Larry Smiltneek

M.S., U. Of Utah

2003

Fracture Mechanics Based Methodoloy - co-supervisor with Professor Larry Reaveley in Civil Engineering

Paul McMullin

Ph.D.-C.E., U. of Utah

2003

Failure Assessment of Landing Gears

Bryce Harris

M.S., U. of Utah

2004

Effect of Microstructure on Pit-to-Crack Transition of 7075-T6 Aluminum Alloy

Kimberli Jones

Ph.D., U. of Utah

2004

Environmental Effects on Fatigue

Carlos Ariscoretta

M.S., U. of Utah

2004

Fretting Fatigue

Sachin Shinde

Ph.D., U. of Utah

2004

Freting Fatigue

Fatih Oktem

M.S., U. of Utah

2004

Corrosion Fatigue-Pitting

Sergio Limon

M.S., U. Of Utah

 


2001 FASIDE International Inc., Salt Lake City, Utah, USA.